6AG2193-6AM00-4AA0

Altitude during operation relating to sea level
Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)

Altitude during operation relating to sea level
Installation altitude above sea level, max	2000m

Ambient temperature during operation
horizontal installation, max	70C; = Tmax; +85 C for 10 min (OT4, ST1/ST2 acc. to EN 50155)

Ambient temperature during operation
vertical installation, max	50C; = Tmax

Ambient temperature during operation
horizontal installation, min	-40C; = Tmin (incl. condensation/frost)
vertical installation, min	-40C; = Tmin

Cable length
Cu conductors	100m

Conformal coating
Qualification and Performance of Electrical Insulating Compound	Yes; Conformal coating, Class A

Conformal coating
Coatings for printed circuit board assemblies acc. to EN 61086	Yes; Class 2 for high reliability
Military testing according to MIL-I-46058C, Amendment 7	Yes; Discoloration of coating possible during service life
Protection against fouling acc. to EN 60664-3	Yes; Type 1 protection

Conformal coating
Electronic equipment on rolling stock acc. to EN 50155	Yes; Class PC2 protective coating acc. to EN 50155:2017

Coolants and lubricants
Resistant to commercially available coolants and lubricants	Yes; Incl. diesel and oil droplets in the air

Dimensions
Depth	59mm
Height	73.5mm
Width	20mm

General information
Product type designation	BA 2x M12 BusAdapter

Interfaces
Number of PROFINET interfaces	1

Other
Note:	for use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A, Online Support article 109736776

Railway application
EN 50125-1	Yes; Rail vehicles - see ambient conditions
EN 50125-3	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
EN 61373	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B

Railway application
EN 50121-3-2	Yes; EMC for rail vehicles
EN 50124-1	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
EN 50125-2	Yes; Stationary electrical equipment - see ambient conditions
Fire protection acc. to EN 45545-2	Yes; For proof of conformity, see Service & Support

Railway application
EN 50121-4	Yes; EMC for signal and telecommunications systems
EN 50155	Yes; Rail vehicles - temperature class OT4, ST1/ST2, horizontal mounting position

Relative humidity
With condensation, tested in accordance with IEC 60068-2-38, max	100%; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation

Remark
Note regarding classification of environmental conditions acc. t	* The supplied plug covers must remain in place over the unused interfaces during operation!

Supports protocol for PROFINET IO
Number of RJ45 ports

Usage in industrial process technology
Against chemically active substances acc. to EN 60654-4	Yes; Class 3 (excluding trichlorethylene)
Environmental conditions for process, measuring and control syst	Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)

Use in stationary industrial systems
to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
to chemically active substances according to EN 60721-3-3	Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust, *

Use on land craft, rail vehicles and special-purpose vehicles
to biologically active substances according to EN 60721-3-5	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request
to chemically active substances according to EN 60721-3-5	Yes; Class 5C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); *
to mechanically active substances according to EN 60721-3-5	Yes; Class 5S3 incl. sand, dust; *

Weights
Weight, approx	59g