6AG2647-8BE72-1HA1

Altitude during operation relating to sea level
Ambient air temperature-barometric pressure-altitude	Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)

Altitude during operation relating to sea level
Installation altitude above sea level, max	2000m

Ambient temperature during storage/transportation
max	60C
min	-20C

Conformal coating
Qualification and Performance of Electrical Insulating Compound	Yes; Conformal coating, Class A

Conformal coating
Electronic equipment on rolling stock acc. to EN 50155	Yes; Class PC2 protective coating acc. to EN 50155:2017

Conformal coating
Coatings for printed circuit board assemblies acc. to EN 61086	Yes; Class 2 for high reliability
Military testing according to MIL-I-46058C, Amendment 7	Yes; Discoloration of coating possible during service life
Protection against fouling acc. to EN 60664-3	Yes; Type 1 protection

Coolants and lubricants
Resistant to commercially available coolants and lubricants	Yes; Incl. diesel and oil droplets in the air

Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max	512kbyte; 128 KB can be stored in the buffer time; optional

Degree and class of protection
IP (rear)	IP40

Degree and class of protection
IP degree of protection	IP40

Dimensions
Depth	60mm
Height	100mm
Width	191mm

Drives
SSD	Yes

Emission of conducted and non-conducted interference
Interference emission via line/AC current cables	EN 61000-6-3, EN 61000-6-4, CISPR 22 Class B, FCC Class A

General information
Product type designation	IPC227E

Graphic
Graphics controller	Integrated

Industrial Ethernet
Industrial Ethernet interface	2x Ethernet (RJ45)

Industrial Ethernet
100 Mbps	Yes
1000 Mbps	Yes

Installation type/mounting
Design	Box PC, built-in unit

Installation type/mounting
Mounting	DIN rail, wall mounting, portrait mounting

Interfaces
Number of industrial Ethernet interfaces	2; 2x Ethernet (RJ45)

Interfaces
Number of PROFINET interfaces	1

Interfaces
Connection for keyboard/mouse	USB / USB
serial interface	Without / 2x COM (RS 232 / 422 / 485), selectable in the BIOS
USB port	1x USB 3.0 / 3x USB 2.0

Interference immunity against discharge of static electricity
Interference immunity against discharge of static electricity

Interference immunity against high-frequency electromagnetic fie
Interference immunity against high frequency radiation	20 V/m for 80 ... 1 000 MHz, 80 % AM acc. to IEC 61000-4-3; 10 V/m for 1 ... 6 GHz, 80 % AM acc. to IEC 61000-4-3

Interference immunity against voltage surge
asymmetric interference

Interference immunity against voltage surge
symmetric interference

Interference immunity to cable-borne interference
Interference immunity on signal cables < 30m
Interference immunity on supply cables

Interference immunity to cable-borne interference
Interference immunity on signal cables >30m

Interference immunity to magnetic fields
Interference immunity to magnetic fields at 50 Hz	100A/m; to IEC 61000-4-8

Isolation
Isolation tested with	750 V DC (type test) and according to EN 50155 (routine test)

Mains buffering
Mains/voltage failure stored energy time	20ms

Memory
Capacity of main memory, max	4Gbyte

Memory
Type of memory	DDR3L SO-DIMM

Monitoring functions
Monitoring function via network	Optional

Monitoring functions
Fan	No

Monitoring functions
Status LEDs	1x power, 3x user
Temperature monitoring	Yes
Watchdog	Yes

Number of PCI slots
Number of compact flash slots	1; CFast
Number of PCI slots	1; Optional

Operating systems
without operating system	Yes; Optional

Operating systems
pre-installed operating system	Windows 10 IoT Enterprise 2019 LTSC, 64 bit, MUI

Other
Note:	for use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A, Online Support article 109736776

pre-installed operating system
Windows 7	Yes; Ultimate 32 bit or 64 bit

pre-installed operating system
Windows 10 Enterprise	Yes; Windows 10 Enterprise 2016 LTSB, 64 bit, MUI

Processor
Processor type	Intel Atom E3845

Processor
Chipset	SoC

Railway application
EN 50125-1	Yes; Rail vehicles - see ambient conditions
EN 50125-3	Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track)
EN 61373	Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B

Railway application
EN 50121-3-2	Yes; EMC for rail vehicles
EN 50124-1	Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.5 kV; UNm = 24 V DC
EN 50125-2	Yes; Stationary electrical equipment - see ambient conditions
Fire protection acc. to EN 45545-2	Yes; For proof of conformity, see Service & Support

Railway application
EN 50121-4	Yes; EMC for signal and telecommunications systems
EN 50155	Yes; Rail vehicles - temperature class OT1, ST1/ST2, horizontal mounting position

Relative humidity
With condensation, tested in accordance with IEC 60068-2-38, max	100%; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation

Remark
Note regarding classification of environmental conditions acc. t	* The supplied plug covers must remain in place over the unused interfaces during operation!

Shock testing
Shock load during operation	Tested according to IEC 60068-2-27: 150 m/s

Slots
free slots	1x PCIe (x1) (optional)

Software
SIMATIC Software	Optionally with pre-installed SIMATIC WinCC RT Advanced / Software Controller CPU 1500S software bundle

Supply voltage
Type of supply voltage	24 V DC

Usage in industrial process technology
Against chemically active substances acc. to EN 60654-4	in preperation
Environmental conditions for process, measuring and control syst	in preperation

Use in stationary industrial systems
to biologically active substances according to EN 60721-3-3	Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request
to chemically active substances according to EN 60721-3-3	Available soon
to mechanically active substances according to EN 60721-3-3	Yes; Class 3S4 incl. sand, dust, *

Use on land craft, rail vehicles and special-purpose vehicles
to biologically active substances according to EN 60721-3-5	Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request
to chemically active substances according to EN 60721-3-5	in preperation
to mechanically active substances according to EN 60721-3-5	Yes; Class 5S3 incl. sand, dust; *

Vibrations
Vibration resistance during operation acc. to IEC 60068-2-6	tested to DIN IEC 60068-2-6: 10 Hz to 58 Hz: 0.075 mm, 58 Hz to 200 Hz: 9.8 m/s

Video interfaces
Graphics interface	1x DisplayPort