Предлагаем вам купить "6EP4135-0GL00-0AY0
по выгодной цене оптом или в розницу. Артикул данного товара - "6EP4135-0GL00-0AY0", бренд – "Siemens". Мы осуществляем доставку по Москве и всей России; гарантируем доставку товара в срок. После оформления заказа, наша команда свяжется с Вами для подтверждения заказа и уточнения деталей доставки. Если у Вас возникли вопросы или требуется помощь в выборе товара, Вы можете связаться с нашим отделом продаж.
6EP4135-0GL00-0AY0, 6EP4135 0GL00 0AY0
| ambient temperature |
| during operation |
-15...+50C |
| during storage |
-20...+40C |
| during transport |
-20...+50C |
| relative temporary capacity loss at 20 C in a month typical |
3% |
| certificate of suitability |
| as approval for USA |
|
| ATEX |
Yes |
| C-Tick |
|
| cCSAus, Class 1, Division 2 |
No |
| CE marking |
Yes |
| CSA approval |
No |
| shipbuilding approval |
available soon |
| UL approval |
No |
| end-of-charge voltage at DC |
| at -10 C recommended |
28V |
| at 0 C recommended |
28V |
| at 10 C recommended |
27.8V |
| at 20 C recommended |
27.3V |
| at 30 C recommended |
26.8V |
| at 40 C recommended |
26.6V |
| at 50 C recommended |
26.3V |
| environmental conditions |
| Operating data note |
For storage, mounting and operation of lead-acid batteries, the relevant DIN/VDE regulations or country-specific regulations (e.g. VDE 0510 Part 2/EN 50272-2) must be observed. You must ensure that the battery site is sufficiently ventilated. Possible sources of ignition must be at least 50 cm away |
| fastening method |
| battery capacity |
12A |
| fastening method |
Wall mounting |
| net weight |
10.2kg |
| number of cells |
2 |
| other information |
Specifications at rated input voltage and ambient temperature +25 C (unless otherwise specified) |
| S7 rail mounting |
No |
| standard rail mounting |
No |
| wall mounting |
Yes |
| Marine classification association |
| American Bureau of Shipping Europe Ltd. (ABS) |
No |
| DNV GL |
No |
| Mechanics |
| depth of the enclosure |
138mm |
| height of the enclosure |
156mm |
| type of electrical connection |
screw-type terminals |
| width of the enclosure |
225mm |
| Mechanics |
| for control circuit and status message |
1 screw terminal each for 0.2 ... 2.5 mm |
| Mechanics |
| for power supply unit |
1 screw terminal each for 0.5 ... 16 mm |
| installation width |
225mm |
| mounting height |
256mm |
| product component included |
2x Maxi Fuse 50 A/32 V |
| Output |
| charging current maximum |
3A |
| Output |
| output voltage at DC rated value |
24V |
| Output |
| output current rated value |
40A |
| required spacing |
| bottom |
50mm |
| left |
0mm |
| right |
0mm |
| top |
50mm |
| Safety |
| display version for normal operation |
Three-color: green = Buffer ready; yellow = Buffer endangered; red = Buffer not possible |
| Safety |
| design of the overload protection |
Valve control |
| Safety |
| operating resource protection class |
Class III |
| protection class IP |
IP20 |
| service life of energy storage |
| ambient temperature during storage |
Along with the storage and operating temperature, other factors such as the duration of the storage period and the charge status during storage have a decisive influence on the possible useful life. Batteries should therefore be stored as briefly as possible, always fully charged, and within the temperature range 0 to +20 C |
| at 20 C typical |
4a |
| at 30 C typical |
2a |
| at 40 C typical |
1a |
| at 50 C typical |
0.5a |
| typical |
capacity falls to 80 % of original capacity (according to EUROBAT) |
