Предлагаем вам купить "6ES7322-1CF00-0AA0
по выгодной цене оптом или в розницу. Артикул данного товара - "6ES7322-1CF00-0AA0", бренд – "Siemens". Мы осуществляем доставку по Москве и всей России; гарантируем доставку товара в срок. После оформления заказа, наша команда свяжется с Вами для подтверждения заказа и уточнения деталей доставки. Если у Вас возникли вопросы или требуется помощь в выборе товара, Вы можете связаться с нашим отделом продаж.
SIMATIC S7-300, SM 322, МОДУЛЬ ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ: ОПТОЭЛЕКТРОННОЕ РАЗДЕЛЕНИЕ ВНЕШНИХ И ВНУТРЕННИХ ЦЕПЕЙ, 8 ВЫХОДОВ 48...125В ПОСТОЯННОГО ТОКА 1.5А, 20-ПОЛЮСНЫЙ ФРОНТАЛЬНЫЙ СОЕДИНИТЕЛЬ ЗАКАЗЫВАЕТСЯ ОТДЕЛЬНО
6ES7322-1CF00-0AA0, 6ES7322 1CF00 0AA0
| Alarms |
| Diagnostics function |
No |
| Alarms |
| Diagnostic alarm |
No |
| Cable length |
| shielded, max |
1000m |
| unshielded, max |
600m |
| connection method / header |
| required front connector |
20-pin |
| Diagnoses |
| Diagnostic information readable |
|
| Digital outputs |
| Number of digital outputs |
8 |
| Digital outputs |
| Short-circuit protection |
Yes; Electronic |
| Dimensions |
| Depth |
120mm |
| Height |
125mm |
| Width |
40mm |
| for signal "1" minimum load current |
| for signal "0" residual current, max |
0.5mA |
| for signal "1" permissible surge current, max |
3A; for 10 ms |
| for signal "1" permissible range for 0 to 40 C, min |
| for signal "1" permissible range for 0 to 40 C, max |
1.5A |
| for signal "1" permissible range for 40 to 60 C, min |
| for signal "1" permissible range for 40 to 60 C, max |
1.5A |
| from load voltage L1 (without load), max |
| from backplane bus 5 V DC, max |
100mA |
| Fuse OK FSG (green) |
| Group error SF (red) |
Yes |
| Status indicator digital output (green) |
Yes |
| horizontal installation |
| up to 40 C, max |
6A |
| Input current |
| from supply voltage L+, max |
|
| Isolation |
| Isolation tested with |
1 500 V AC |
| Limitation of inductive shutdown voltage to |
| Controlling a digital input |
Yes |
| Size of motor starters according to NEMA, max |
|
| Load voltage L+ |
| Reverse polarity protection |
Yes; through fuse |
| Load voltage L+ |
| permissible range, lower limit (DC) |
40V |
| permissible range, upper limit (DC) |
140V |
| Rated value (DC) |
48V; 48 V DC to 125 V DC |
| Mains buffering |
| Mains/voltage failure stored energy time |
|
| Output current |
| for signal "1" rated value |
1.5A |
| Output delay with resistive load |
| "0" to "1", max |
2ms |
| "1" to "0", max |
15ms |
| Output voltage |
| for signal "1", min |
L+ (-1.2 V) |
| Parallel switching of two outputs |
| for uprating |
No |
| Parallel switching of two outputs |
| for redundant control of a load |
Yes; only outputs of the same group |
| Potential separation digital outputs |
| between the channels |
Yes |
| between the channels, in groups of |
4 |
| Potential separation digital outputs |
| between the channels and the power supply of the electronics |
|
| Potential separation digital outputs |
| between the channels and backplane bus |
Yes; Optocoupler |
| Power loss |
| Power loss, typ |
7.2W |
| Switching capacity of the outputs |
| on lamp load, max |
15W; 15 W (48 V) or 40 W (125 V) |
| Switching frequency |
| with inductive load (acc. to IEC 60947-5-1, DC13), max |
0.5Hz |
| Switching frequency |
| with inductive load, max |
0.5Hz |
| with resistive load, max |
25Hz |
| up to 50 C, max |
| up to 60 C, max |
3A |
| vertical installation |
| up to 40 C, max |
4A |
| Weights |
| Weight, approx |
250g |
| with inductive load (acc. to IEC 60947-5-1, AC15), max |
| on lamp load, max |
10Hz |
