Предлагаем вам купить "6ES7322-1FL00-0AA0
по выгодной цене оптом или в розницу. Артикул данного товара - "6ES7322-1FL00-0AA0", бренд – "Siemens". Мы осуществляем доставку по Москве и всей России; гарантируем доставку товара в срок. После оформления заказа, наша команда свяжется с Вами для подтверждения заказа и уточнения деталей доставки. Если у Вас возникли вопросы или требуется помощь в выборе товара, Вы можете связаться с нашим отделом продаж.
SIMATIC S7-300, SM 322, МОДУЛЬ ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ: ГАЛЬВАНИЧЕСКОЕ РАЗДЕЛЕНИЕ ВНЕШНИХ И ВНУТРЕННИХ ЦЕПЕЙ, 32 ВЫХОДА ~120/230В/ 1A, КОРПУС ДВОЙНОЙ ШИРИНЫ. ДВА 20-ПОЛЮСНЫХ ФРОНТАЛЬНЫХ СОЕДИНИТЕЛЯ ЗАКАЗЫВАЕТСЯ ОТДЕЛЬНО
6ES7322-1FL00-0AA0, 6ES7322 1FL00 0AA0
| Alarms |
| Diagnostic alarm |
No |
| Cable length |
| shielded, max |
1000m |
| unshielded, max |
600m |
| connection method / header |
| required front connector |
20-pin |
| Digital outputs |
| Number of digital outputs |
32 |
| Digital outputs |
| Zero-crossing switch |
Yes; Max. 60 V |
| Digital outputs |
| Controlling a digital input |
Yes |
| Short-circuit protection |
No |
| Digital outputs |
| Size of motor starters according to NEMA, max |
Size 4 according to NEMA |
| Dimensions |
| Depth |
117mm |
| Height |
125mm |
| Width |
80mm |
| from supply voltage L+, max |
| from backplane bus 5 V DC, max |
190mA |
| from load voltage L1 (without load), max |
10mA |
| Fuse OK FSG (green) |
| Group error SF (red) |
Yes |
| Status indicator digital output (green) |
Yes; per channel |
| horizontal installation |
| up to 40 C, max |
4A |
| up to 60 C, max |
3A |
| Interrupts/diagnostics/status information |
| Alarms |
No |
| Diagnostics function |
Yes; Fuse blown or load voltage missing |
| Isolation |
| Isolation tested with |
4 000 V DC |
| Load voltage L1 |
| permissible frequency range, lower limit |
47Hz |
| permissible frequency range, upper limit |
63Hz |
| permissible range, lower limit (AC) |
79V |
| permissible range, upper limit (AC) |
264V |
| Rated value (AC) |
120V; 120/230 V AC |
| Output current |
| for signal "0" residual current, max |
2mA |
| Output current |
| for signal "1" permissible range for 0 to 40 C, max |
1A |
| for signal "1" permissible range for 0 to 40 C, min |
10mA |
| for signal "1" permissible range for 40 to 60 C, max |
1A |
| for signal "1" permissible range for 40 to 60 C, min |
10mA |
| Output current |
| for signal "1" minimum load current |
10mA |
| for signal "1" rated value |
1A |
| Output current |
| for signal "1" permissible surge current, max |
10A; per group (for 2 AC cycles) |
| Output delay with resistive load |
| "0" to "1", max |
1 AC cycle |
| "1" to "0", max |
1 AC cycle |
| Output voltage |
| for signal "1", min |
L1 (-0.8 V) |
| Parallel switching of two outputs |
| for uprating |
No |
| Parallel switching of two outputs |
| for redundant control of a load |
Yes; only outputs of the same group |
| Potential separation digital outputs |
| between the channels and backplane bus |
Yes; Optocoupler |
| Potential separation digital outputs |
| between the channels |
Yes |
| between the channels, in groups of |
8 |
| Power loss |
| Power loss, typ |
25W |
| Switching capacity of the outputs |
| on lamp load, max |
50W |
| Switching frequency |
| with inductive load (acc. to IEC 60947-5-1, AC15), max |
0.5Hz |
| Switching frequency |
| with inductive load, max |
0.5Hz |
| with resistive load, max |
10Hz |
| vertical installation |
| up to 40 C, max |
4A |
| Weights |
| Weight, approx |
500g |
| With inductive load (to IEC 60947-5-1, DC13/AC15), max |
| on lamp load, max |
1Hz |
