IE/PB Link PN IO: для подключения сети PROFIBUS DP к сети PROFINET IO (без C-PLUG) - 6GK1411-5AB10

suitability for operation	Gateway between Industrial Ethernet and PROFIBUS

accessories
accessories	Optional: C-PLUG, BusAdapter of the ET 200SP system

ambient temperature
during storage	-40...+70C
during transport	-40...+70C
for horizontally arranged busbars during operation	0...60C
for vertical installation during operation	0...40C

configuration software
required	STEP 7 as of V5.5 SP4 HF11 and HSP, STEP 7 Professional as of V15, PCS7 V9.0, PCS neo as of V3.0, PNI as of V1.0

consumed current
from external supply voltage at DC at 24 V maximum	0.3A
from external supply voltage at DC at 24 V typical	0.2A
power loss [W]	4.8W; Typical

data volume
of the address range of the inputs as DP master total	2048byte
of the address range of the inputs per DP slave	244byte
of the address range of the outputs as DP master total	2048byte
of the address range of the outputs per DP slave	244byte

design of the removable storage
C-PLUG	Yes

design, dimensions and weights
depth	74mm
height	117mm
module format	ET 200SP design
net weight	0.6kg
width	100mm

fastening method
35 mm top hat DIN rail mounting	Yes

identification & maintenance function
I&M0 - device-specific information	Yes
I&M1 - higher level designation/location designation	Yes
I&M2 - installation date	Yes
I&M3 - comment	Yes

number of DP slaves
at the 2nd interface as DP master maximum	64

number of electrical connections
at the 1st interface according to Industrial Ethernet	2
at the 2nd interface according to PROFIBUS	1
for power supply	2

number of possible connections for S7 communication
maximum	32

performance data multi-protocol mode
number of active connections with multi-protocol mode	48

performance data PROFINET communication as PN IO device
product function PROFINET IO device	Yes

product function
of the PROFINET IO device is supported PROFINET system redundanc	No
protocol is supported Media Redundancy Protocol (MRP)	Yes
ring redundancy	Yes

product functions management, configuration, engineering
product function MIB support	Yes

product functions routing
number of possible connections with data set routing maximum	32
service as PROFIBUS data set routing	Yes

product functions time
product function pass on time synchronization	Yes

protocol is supported
DCP	Yes
LLDP	Yes
NTP	Yes
SIMATIC time synchronization (SIMATIC Time)	Yes
SNMP v1	Yes

relative humidity
at 25 C without condensation during operation maximum	95%
protection class IP	IP20

service as DP master
DPV0	Yes
DPV1	Yes

standards, specifications, approvals hazardous environments
certificate of suitability CCC for hazardous zone according to G	Yes

supply voltage, current consumption, power loss
relative negative tolerance at DC at 24 V	15%
supply voltage external at DC rated value	24V

supply voltage, current consumption, power loss
relative positive tolerance at DC at 24 V	20%
type of voltage of the supply voltage	DC

transfer rate
at the 1st interface	10...100Mbit/s

transfer rate
at the 2nd interface	9.6kbit/s...12Mbit/s

type of electrical connection
at the 1st interface according to Industrial Ethernet	RJ45 port onboard or bus adapter
at the 2nd interface according to PROFIBUS	9-pin Sub-D socket (RS 485)
for power supply	4-pole terminal block