Предлагаем вам купить "Siemens 6ES7322-1BF01-0AA0 по выгодной цене оптом или в розницу. Артикул данного товара - "6ES7322-1BF01-0AA0", бренд – "Siemens". Мы осуществляем доставку по Москве и всей России; гарантируем доставку товара в срок. После оформления заказа, наша команда свяжется с Вами для подтверждения заказа и уточнения деталей доставки. Если у Вас возникли вопросы или требуется помощь в выборе товара, Вы можете связаться с нашим отделом продаж.
Siemens 6ES7 322-1BF01-0AA0
Состояние НОВЫЙ в коробке / БУ
---------------
Отправка ТК СДЭК / Деловые линии
Гарантия 1 месяц.
Привезём под заказ любую продукцию Siemens!
SIMATIC S7-300, SM 322, МОДУЛЬ ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ: ГАЛЬВАНИЧЕСКОЕ РАЗДЕЛЕНИЕ ВНЕШНИХ И ВНУТРЕННИХ ЦЕПЕЙ, 8 ВЫХОДОВ =24В/2A. 20-ПОЛЮСНЫЙ ФРОНТАЛЬНЫЙ СОЕДИНИТЕЛЬ ЗАКАЗЫВАЕТСЯ ОТДЕЛЬНО
6ES7322-1BF01-0AA0, 6ES7322 1BF01 0AA0
| Alarms | |
| Diagnostics function | No |
| Alarms | |
| Diagnostic alarm | No |
| Cable length | |
| shielded, max | 1000m |
| unshielded, max | 600m |
| connection method / header | |
| required front connector | 20-pin |
| Diagnoses | |
| Diagnostic information readable | |
| Digital outputs | |
| Number of digital outputs | 8 |
| Digital outputs | |
| Short-circuit protection | Yes; Electronic |
| Dimensions | |
| Depth | 120mm |
| Height | 125mm |
| Width | 40mm |
| for signal "1" minimum load current | |
| for signal "0" residual current, max | 0.5mA |
| for signal "1" permissible surge current, max | |
| for signal "1" permissible range for 0 to 40 C, min | |
| for signal "1" permissible range for 0 to 40 C, max | 2.4A |
| for signal "1" permissible range for 40 to 60 C, min | |
| for signal "1" permissible range for 40 to 60 C, max | 2.4A |
| from load voltage L1 (without load), max | |
| from backplane bus 5 V DC, max | 40mA |
| Fuse OK FSG (green) | |
| Group error SF (red) | |
| Status indicator digital output (green) | Yes; per channel |
| horizontal installation | |
| up to 40 C, max | 4A |
| Input current | |
| from supply voltage L+, max | |
| Isolation | |
| Isolation tested with | 500 V DC |
| Limitation of inductive shutdown voltage to | |
| Controlling a digital input | Yes |
| Size of motor starters according to NEMA, max | |
| Load voltage L+ | |
| Reverse polarity protection | |
| Load voltage L+ | |
| permissible range, lower limit (DC) | 20.4V |
| permissible range, upper limit (DC) | 28.8V |
| Rated value (DC) | 24V |
| Mains buffering | |
| Mains/voltage failure stored energy time | |
| Output current | |
| for signal "1" rated value | 2A |
| Output delay with resistive load | |
| "0" to "1", max | 100 |
| "1" to "0", max | 500 |
| Output voltage | |
| for signal "1", min | L+ (-0.8 V) |
| Parallel switching of two outputs | |
| for uprating | No |
| Parallel switching of two outputs | |
| for redundant control of a load | Yes |
| Potential separation digital outputs | |
| between the channels | Yes |
| between the channels, in groups of | 4 |
| Potential separation digital outputs | |
| between the channels and the power supply of the electronics | |
| Potential separation digital outputs | |
| between the channels and backplane bus | Yes; Optocoupler |
| Power loss | |
| Power loss, typ | 6.8W |
| Switching capacity of the outputs | |
| on lamp load, max | 10W |
| Switching frequency | |
| with inductive load (acc. to IEC 60947-5-1, DC13), max | 0.5Hz |
| Switching frequency | |
| with inductive load, max | 0.5Hz |
| with resistive load, max | 100Hz |
| up to 50 C, max | |
| up to 60 C, max | 4A |
| vertical installation | |
| up to 40 C, max | 4A |
| Weights | |
| Weight, approx | 190g |
| with inductive load (acc. to IEC 60947-5-1, AC15), max | |
| on lamp load, max | 10Hz |