SIMATIC S7-1200 Блок питания PM 1207 6EP1 332-1SH71

ambient temperature
during operation	0...60C; with natural convection
during storage	-40...+85C
during transport	-40...+85C
environmental category according to IEC 60721	Climate class 3K3, 5

certificate of suitability
ATEX	Yes; ATEX (EX) II 3G Ex nA nC IIC T4 Gc
cCSAus, Class 1, Division 2	No
CE marking	Yes
certificate of suitability shipbuilding approval	Yes
CSA approval	Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950-1, CSA C22.2 No. 60950-1) File E151273
EAC approval	Yes
FM registration	Yes; Class I, Div. 2, Group ABCD, T4
IECEx	Yes; IECEx Ex nA nC IIC T4 Gc
NEC Class 2	No
relating to ATEX	IECEx Ex nA nC IIC T4 Gc; ATEX (EX) II 3G Ex nA nC IIC T4 Gc; cULus (ISA 12.12.01, CSA C22.2 No.213) Class I, Div. 2, Group ABCD, T4, File E330455
shipbuilding approval	ABS, BV, DNV GL, LRS, NK
type of certification CB-certificate	Yes
UL approval	Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cURus-Recognized (UL 60950-1, CSA C22.2 No. 60950-1) File E151273
ULhazloc approval	Yes

Closed-loop control
relative control precision of the output voltage load step of re	3%
relative control precision of the output voltage with rapid fluc	0.3%

duration of inrush current limiting at 25 C
fuse protection type	T 3,15 A/250 V (not accessible)
I2t value maximum	0.5A
in the feeder	Recommended miniature circuit breaker: 16 A characteristic B or 10 A characteristic C
maximum	3ms

duration of overloading capability for excess current
at short-circuit during operation	100ms
on short-circuiting during the start-up	100ms

Efficiency
efficiency in percent	83%

enduring short circuit current RMS value
display version for overload and short circuit	-
typical	2.7A

Input
type of the power supply network	1-phase AC

input current
at rated input voltage 120 V	1.2A
at rated input voltage 230 V	0.67A
current limitation of inrush current at 25 C maximum	13A

input voltage
1 at AC	85...132V
2 at AC	176...264V
buffering time for rated value of the output current in the even	20ms
design of input wide range input	No
operating condition of the mains buffering	at Vin = 93/187 V
overvoltage overload capability	2.3 × Vin rated, 1.3 ms

leakage current
maximum	3.5mA
protection class IP	IP20

line frequency
1 rated value	50Hz
2 rated value	60Hz
line frequency	47...63Hz

Marine classification association
American Bureau of Shipping Europe Ltd. (ABS)	Yes
DNV GL	Yes
French marine classification society (BV)	Yes
Lloyds Register of Shipping (LRS)	Yes
Nippon Kaiji Kyokai (NK)	Yes

Mechanics
at input	L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm
at output	L+, M: 2 screw terminals each for 0.5 ... 2.5 mm
depth of the enclosure	75mm
for auxiliary contacts	-
height of the enclosure	100mm
type of electrical connection	screw-type terminals
width of the enclosure	70mm

Output
output voltage at DC rated value	24V
voltage curve at output	Controlled, isolated DC voltage

output current
rated range	0...2.5A
rated value	2.5A
supplied active power typical	60W

output voltage
at output 1 at DC rated value	24V
relative overall tolerance of the voltage	3%

power loss [W]
at rated output voltage for rated value of the output current ty	12W

product feature
bridging of equipment	Yes
number of parallel-switched equipment resources for increasing t	2

Protection and monitoring
design of short-circuit protection	Constant current characteristic
design of the overvoltage protection	< 33 V
property of the output short-circuit proof	Yes
response value current limitation typical	2.65A

relative control precision of the output voltage
on slow fluctuation of input voltage	0.1%
on slow fluctuation of ohm loading	0.2%

required spacing
bottom	20mm
fastening method	Snaps onto DIN rail EN 60715 35x7.5/15, wall mounting
left	0mm
MTBF at 40 C	1492537h
net weight	0.3kg
other information	Specifications at rated input voltage and ambient temperature +25 C (unless otherwise specified)
product feature of the enclosure housing can be lined up	Yes
right	0mm
top	20mm

residual ripple
maximum	150mV

Safety
galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
galvanic isolation between input and output	Yes
operating resource protection class	Class I

setting time
load step 100 to 50% typical	5ms
load step 50 to 100% typical	5ms
maximum	5ms

short-term overload current
at short-circuit during operation typical	6A
on short-circuiting during the start-up typical	6A

standard
for emitted interference	EN 55022 Class B
for interference immunity	EN 61000-6-2
for mains harmonics limitation	not applicable

supply voltage
1 at AC rated value	120V
2 at AC rated value	230V

supply voltage at AC
initial value	Automatic range selection

voltage increase time of the output voltage
typical	10ms

voltage peak
behavior of the output voltage when switching on	No overshoot of Vout (soft start)
display version for normal operation	Green LED for 24 V OK
maximum	240mV
product function output voltage adjustable	No
response delay maximum	6s; 2 s at 230 V, 6 s at 120 V
type of output voltage setting	-