6ES7 522-1BL01-0AB0 SIMATIC S7-1500 Модуль вывода дискретных сигналов SM 1522

"0" to "1", typ
"0" to "1", max	100

"1" to "0", typ
"1" to "0", max	500

Alarms
Diagnostic alarm	Yes

Alarms
Maintenance interrupt	Yes

Altitude during operation relating to sea level
Installation altitude above sea level, max	5000m; Restrictions for installation altitudes > 2 000 m, see manual

Ambient temperature during operation
vertical installation, max	40C

Ambient temperature during operation
horizontal installation, min	-30C; From FS03
vertical installation, min	-30C; From FS03

Ambient temperature during operation
horizontal installation, max	60C

Cable length
shielded, max	1000m
unshielded, max	600m

Current-sinking
Controlling a digital input	Yes
Current-sourcing	Yes
Digital outputs, parameterizable	Yes
Limitation of inductive shutdown voltage to	L+ (-53 V)
Response threshold, typ	1A
Short-circuit protection	Yes; Clocked electronically

Diagnoses
Short-circuit	Yes

Diagnoses
Monitoring the supply voltage	Yes

Diagnoses
Group error	Yes
Wire-break	Yes

Diagnostics indication LED
ERROR LED	Yes; red LED

Diagnostics indication LED
Channel status display	Yes; green LED
for module diagnostics	Yes; red LED

Diagnostics indication LED
for channel diagnostics	Yes; red LED
Monitoring of the supply voltage (PWR-LED)	Yes; green LED
RUN LED	Yes; green LED

Diagnostics indication LED
MAINT LED	Yes; Yellow LED

Digital outputs
Number of digital outputs	32
Type of digital output	Transistor

Dimensions
Depth	129mm
Height	147mm
Width	35mm

Engineering with
STEP 7 TIA Portal configurable/integrated from version	V13 SP1 / -

Engineering with
PROFIBUS from GSD version/GSD revision	V1.0 / V5.1
PROFINET from GSD version/GSD revision	V2.3 / -
STEP 7 configurable/integrated from version	V5.5 SP3 / -

General information
Firmware version	V1.1.0
HW functional status	From FS02
Product type designation	DQ 32x24VDC/0.5A HF

General information
FW update possible

Highest safety class achievable for safety-related tripping of s
Category according to ISO 13849-1	Cat. 3
Performance level according to ISO 13849-1	PL d
SIL acc. to IEC 62061	SIL 2

Input current
Current consumption, max	60mA

Interrupts/diagnostics/status information
Substitute values connectable	Yes

Interrupts/diagnostics/status information
Diagnostics function	Yes

Isochronous mode
Bus cycle time (TDP), min	250
Execution and activation time (TCO), min	70

Isolation
Isolation tested with	707 V DC (type test)

Load resistance range
lower limit	48Ω

Load resistance range
upper limit	12kΩ

Operating mode
Cam control (switching at comparison values)	No
DQ	Yes
DQ with energy-saving function	No
Integrated operating cycle counter	Yes
MSO	Yes
Oversampling	No
PWM	No

Output current
for signal "0" residual current, max	0.5mA

Output current
for signal "1" permissible range, max	0.5A

Output current
for signal "1" rated value	0.5A

Output voltage
for signal "1", min	L+ (-0.8 V)

output voltage / header
Rated value (DC)	24V

Parallel switching of two outputs
for uprating	No

Parallel switching of two outputs
for logic links	Yes
for redundant control of a load	Yes

Potential separation channels
between the channels	No
between the channels and backplane bus	Yes
between the channels, in groups of	8

Power
Power available from the backplane bus	1.1W

Power loss
Power loss, typ	3.5W

Product function
Isochronous mode	Yes

Product function
Prioritized startup	Yes

Product function
I&M data	Yes; I&M0 to I&M3

Standards, approvals, certificates
Suitable for safety functions	No
Suitable for safety-related tripping of standard modules	Yes; From FS02

Supply voltage
Reverse polarity protection	Yes; through internal protection with 7 A per group

Supply voltage
permissible range, lower limit (DC)	19.2V
permissible range, upper limit (DC)	28.8V
Rated value (DC)	24V

Switching capacity of the outputs
on lamp load, max	5W

Switching capacity of the outputs
with resistive load, max	0.5A

Switching frequency
on lamp load, max	10Hz

Switching frequency
with inductive load, max	0.5Hz; According to IEC 60947-5-1, DC-13
with resistive load, max	100Hz

Total current of the outputs
Current per channel, max	0.5A; see additional description in the manual
Current per group, max	4A; see additional description in the manual
Current per module, max	16A; see additional description in the manual

Weights
Weight, approx	280g