6ES7 531-7PF00-0AB0 SIMATIC S7-1500 Модуль ввода аналоговых сигналов SM 1531

Alarms
Diagnostic alarm	Yes

Alarms
Limit value alarm	Yes; two upper and two lower limit values in each case

Ambient temperature during operation
horizontal installation, min	0C
vertical installation, min	0C

Ambient temperature during operation
horizontal installation, max	60C

Ambient temperature during operation
vertical installation, max	40C

Analog inputs
Constant measurement current for resistance-type transmitter, ty	150 Ohm, 300 Ohm, 600 Ohm, Cu10, Cu50, Cu100, Ni10, Ni100, Ni120, Ni200, Pt10, Pt50, Pt100, Pt200 climate: 1 mA; 6 kOhm, Ni500, Ni1000, LG-Ni1000, Pt200 standard, Pt500, Pt1000, PTC: 0.25 mA
permissible input voltage for voltage input (destruction limit),	20V

Analog inputs
Technical unit for temperature measurement adjustable	Yes; C/F/K

Analog inputs
For resistance/resistance thermometer measurement	8; Plus one additional RTD (reference) channel

Analog inputs
Number of analog inputs	8; Plus one additional RTD (reference) channel

Analog inputs
For thermocouple measurement	8; Plus one additional RTD (reference) channel
For voltage measurement	8; Plus one additional RTD (reference) channel

Basic error limit (operational limit at 25 C)
Resistance thermometer, relative to input range, (+/-)	Cuxxx Standard:
Resistance, relative to input range, (+/-)	0.05%
Thermocouple, relative to input range, (+/-)	Type B: > 600 C
Voltage, relative to input range, (+/-)	0.05%

Cable length
shielded, max	800m; at U; 200 m at R/RTD/TC

CiR - Configuration in RUN
Calibration possible in RUN	Yes
Reparameterization possible in RUN	Yes

Connection of signal encoders
for current measurement as 2-wire transducer	No
for current measurement as 4-wire transducer	No
for resistance measurement with four-wire connection	Yes; All measuring ranges except PTC
for resistance measurement with three-wire connection	Yes; All measuring ranges except PTC; internal compensation of the cable resistances
for resistance measurement with two-wire connection	Yes
for voltage measurement	Yes

Diagnoses
Wire-break	Yes; Only with TC, R, RTD

Diagnoses
Monitoring the supply voltage	Yes

Diagnoses
Overflow/underflow	Yes

Diagnostics indication LED
Channel status display	Yes; green LED
for module diagnostics	Yes; red LED

Diagnostics indication LED
for channel diagnostics	Yes; red LED
Monitoring of the supply voltage (PWR-LED)	Yes; green LED
RUN LED	Yes; green LED

Diagnostics indication LED
ERROR LED	Yes; red LED

Dimensions
Depth	129mm
Height	147mm
Width	35mm

Engineering with
PROFIBUS from GSD version/GSD revision	V1.0 / V5.1
PROFINET from GSD version/GSD revision	V2.3 / -
STEP 7 configurable/integrated from version	V5.5 SP3 / -

Engineering with
STEP 7 TIA Portal configurable/integrated from version	V14 / -

Errors/accuracies
Crosstalk between the inputs, max	-80dB
Linearity error (relative to input range), (+/-)	0.02%
Temperature error of internal compensation

Errors/accuracies
Repeat accuracy in steady state at 25 C (relative to input range	0.02%

Errors/accuracies
Temperature error (relative to input range), (+/-)	0.005%/K

General information
FW update possible	Yes

General information
Firmware version	V1.1.0
HW functional status	FS01
Product type designation	AI 8xU/R/RTD/TC HF

Input current
Current consumption, max	55mA; with 24 V DC supply

Input ranges (rated values), currents
4 mA to 20 mA	No

Input ranges (rated values), currents
-20 mA to +20 mA	No

Input ranges (rated values), currents
0 to 20 mA	No

Input ranges (rated values), resistance thermometer
Input resistance (Cu 10 according to GOST)	10MΩ
Input resistance (Cu 10)	10MΩ
Input resistance (Cu 100 according to GOST)	10MΩ
Input resistance (Cu 100)	10MΩ
Input resistance (Cu 50 according to GOST)	10MΩ
Input resistance (Cu 50)	10MΩ
Input resistance (LG-Ni 1000)	10MΩ
Input resistance (Ni 10 according to GOST)	10MΩ
Input resistance (Ni 10)	10MΩ
Input resistance (Ni 100 according to GOST)	10MΩ
Input resistance (Ni 100)	10MΩ
Input resistance (Ni 1000 according to GOST)	10MΩ
Input resistance (Ni 1000)	10MΩ
Input resistance (Ni 120 according to GOST)	10MΩ
Input resistance (Ni 120)	10MΩ
Input resistance (Ni 200 according to GOST)	10MΩ
Input resistance (Ni 200)	10MΩ
Input resistance (Ni 500 according to GOST)	10MΩ
Input resistance (Ni 500)	10MΩ
Input resistance (Pt 10 according to GOST)	10MΩ
Input resistance (Pt 10)	10MΩ
Input resistance (Pt 100 according to GOST)	10MΩ
Input resistance (Pt 100)	10MΩ
Input resistance (Pt 1000 according to GOST)	10MΩ
Input resistance (Pt 1000)	10MΩ
Input resistance (Pt 200 according to GOST)	10MΩ
Input resistance (Pt 200)	10MΩ
Input resistance (Pt 50 according to GOST)	10MΩ
Input resistance (Pt 50)	10MΩ
Input resistance (Pt 500 according to GOST)	10MΩ
Input resistance (Pt 500)	10MΩ

Input ranges (rated values), resistance thermometer
Cu 10 according to GOST	Yes; Standard/climate
Cu 100	Yes; Standard/climate
Cu 100 according to GOST	Yes; Standard/climate
Cu 50	Yes; Standard/climate
Cu 50 according to GOST	Yes; Standard/climate
Ni 10	Yes; Standard/climate
Ni 10 according to GOST	Yes; Standard/climate
Ni 100 according to GOST	Yes; Standard/climate
Ni 1000 according to GOST	Yes; Standard/climate
Ni 120 according to GOST	Yes; Standard/climate
Ni 200 according to GOST	Yes; Standard/climate
Ni 500 according to GOST	Yes; Standard/climate
Pt 10	Yes; Standard/climate
Pt 10 according to GOST	Yes; Standard/climate
Pt 100 according to GOST	Yes; Standard/climate
Pt 1000 according to GOST	Yes; Standard/climate
Pt 200 according to GOST	Yes; Standard/climate
Pt 50	Yes; Standard/climate
Pt 50 according to GOST	Yes; Standard/climate
Pt 500 according to GOST	Yes; Standard/climate

Input ranges (rated values), resistance thermometer
Cu 10	Yes; Standard/climate
LG-Ni 1000	Yes; Standard/climate
Ni 100	Yes; Standard/climate
Ni 1000	Yes; Standard/climate
Ni 120	Yes; Standard/climate
Ni 200	Yes; Standard/climate
Ni 500	Yes; Standard/climate
Pt 1000	Yes; Standard/climate
Pt 200	Yes; Standard/climate
Pt 500	Yes; Standard/climate

Input ranges (rated values), resistance thermometer
Pt 100	Yes; Standard/climate

Input ranges (rated values), resistors
Input resistance (0 to 150 ohms)	10MΩ
Input resistance (0 to 300 ohms)	10MΩ
Input resistance (0 to 600 ohms)	10MΩ
Input resistance (0 to 6000 ohms)	10MΩ
Input resistance (PTC)	10MΩ

Input ranges (rated values), resistors
0 to 3000 ohms	No
0 to 6000 ohms	Yes
PTC	Yes

Input ranges (rated values), resistors
0 to 150 ohms	Yes
0 to 300 ohms	Yes
0 to 600 ohms	Yes

Input ranges (rated values), thermocouples
Input resistance (Type B)	10MΩ
Input resistance (Type C)	10MΩ
Input resistance (Type E)	10MΩ
Input resistance (type J)	10MΩ
Input resistance (Type K)	10MΩ
Input resistance (Type N)	10MΩ
Input resistance (Type R)	10MΩ
Input resistance (Type S)	10MΩ
Input resistance (Type T)	10MΩ
Input resistance (Type TXK/TXK(L) to GOST)	10MΩ

Input ranges (rated values), thermocouples
Type L	No

Input ranges (rated values), thermocouples
Type B	Yes
Type C	Yes
Type E	Yes
Type J	Yes
Type K	Yes
Type N	Yes
Type R	Yes
Type S	Yes
Type T	Yes
Type TXK/TXK(L) to GOST	Yes

Input ranges (rated values), voltages
Input resistance (-1 V to +1 V)	10MΩ
Input resistance (-25 mV to +25 mV)	10MΩ
Input resistance (-250 mV to +250 mV)	10MΩ
Input resistance (-50 mV to +50 mV)	10MΩ
Input resistance (-500 mV to +500 mV)	10MΩ
Input resistance (-80 mV to +80 mV)	10MΩ

Input ranges (rated values), voltages
-10 V to +10 V	No
-2.5 V to +2.5 V	No
-5 V to +5 V	No
-80 mV to +80 mV	Yes

Input ranges (rated values), voltages
0 to +10 V	No

Input ranges (rated values), voltages
-1 V to +1 V	Yes
-25 mV to +25 mV	Yes
-250 mV to +250 mV	Yes
-50 mV to +50 mV	Yes
-500 mV to +500 mV	Yes
0 to +5 V	No
1 V to 5 V	No

Integration and conversion time/resolution per channel
Basic conversion time, including integration time (ms)	Fast mode: 4 / 18 / 22 / 102 ms; Standard mode: 9 / 52 / 62 / 302 ms
Integration time (ms)	Fast mode: 2.5 / 16.67 / 20 / 100 ms, standard mode: 7.5 / 50 / 60 / 300 ms

Integration and conversion time/resolution per channel
additional conversion time for wire-break monitoring	Thermocouples, 150 Ohm, 300 Ohm, 600 Ohm, Cu10, Cu50, Cu100, Ni10, Ni100, Ni120, Ni200, Pt10, Pt50, Pt100: 4 ms; 6 kOhm, Ni500, Ni1000, LG-Ni1000, Pt200, Pt500, Pt1000: 13 ms
Interference voltage suppression for interference frequency f1 i	400 / 60 / 50 / 10 Hz

Integration and conversion time/resolution per channel
Basic execution time of the module (all channels released)	Corresponds to the channel with the highest basic conversion time

Integration and conversion time/resolution per channel
Integration time, parameterizable	Yes
Resolution with overrange (bit including sign), max	21bit; For measuring mode RTC and TC when using the function "Scalable temperature measuring range" (32 bit REAL format); 16 bit for measuring mode R and U; 16 bit for all measuring modes when using the S7 format (16 bit INTEGER)

Interference voltage suppression for f = n x (f1 +/- 1 %), f1 =
Common mode interference, min	80dB
Common mode voltage, max	60 V DC/30 V AC
Series mode interference (peak value of interference < rated	80dB; in the Standard operating mode, 40 dB in the Fast operating mode

Interrupts/diagnostics/status information
Diagnostics function	Yes

Isolation
Isolation tested with	2 000 V DC between the channels and the supply voltage L+; 2 000 V DC between the channels and the backplane bus; 2 000 V DC between the channels; 707 V DC (type test) between the supply voltage L+ and the backplane bus

Operating mode
MSI	Yes
Oversampling	No

Operational error limit in overall temperature range
Resistance thermometer, relative to input range, (+/-)	Cuxxx Standard:
Resistance, relative to input range, (+/-)	0.1%
Voltage, relative to input range, (+/-)	0.1%

Operational error limit in overall temperature range
Thermocouple, relative to input range, (+/-)	Type B: > 600 C

Other
Note:	for the R/RDT three-wire measurement, the conductor compensation is made alternating with the measurement; this then requires two module cycles for a measured value

Permissible potential difference
between different circuits	60 V DC/30 V AC; insulation rated for 120 V AC basic insulation: between the channels and the supply voltage L+; between the channels and the backplane bus; between the channels

Potential separation channels
between the channels	Yes
between the channels and backplane bus	Yes
between the channels and the power supply of the electronics	Yes
between the channels, in groups of	1

Power
Power available from the backplane bus	0.85W

Power loss
Power loss, typ	1.9W

Product function
I&M data	Yes; I&M0 to I&M3

Product function
Adjustment of measuring range	No
Measuring range scalable	Yes
Scalable measured values	No

Product function
Prioritized startup	Yes

Product function
Isochronous mode	No

Smoothing of measured values
parameterizable	Yes
Step: High	Yes
Step: low	Yes
Step: Medium	Yes
Step: None	Yes

Standards, approvals, certificates
Suitable for applications according to AMS 2750	Yes; Declaration of Conformity, see online support entry 109757262

Standards, approvals, certificates
Suitable for applications according to CQI-9	Yes; Based on AMS 2750 E

Supply voltage
Reverse polarity protection	Yes

Supply voltage
permissible range, lower limit (DC)	19.2V
permissible range, upper limit (DC)	28.8V
Rated value (DC)	24V

Temperature compensation
Compensation for 0 C reference point temperature	Yes; fixed value can be set
external temperature compensation via RTD	Yes
internal temperature compensation	Yes
parameterizable	Yes
Reference channel of the module	Yes; 9th channel that can be used as a genuine 9th RTD channel regardless of the parameterization of the other channels, or that can be used for compensation in the case of TC measurement

Weights
Weight, approx	290g