6ES7 532-5NB00-0AB0 SIMATIC S7-1500 Модуль вывода аналоговых сигналов SM 1532 (1)

Alarms
Diagnostic alarm	Yes

Altitude during operation relating to sea level
Installation altitude above sea level, max	5000m; Restrictions for installation altitudes > 2 000 m, see manual

Ambient temperature during operation
horizontal installation, min	-30C; from FS04
vertical installation, min	-30C; from FS04

Ambient temperature during operation
horizontal installation, max	60C

Ambient temperature during operation
vertical installation, max	40C

Analog outputs
Current output, no-load voltage, max	22V
Cycle time (all channels), min	3.2ms; independent of number of activated channels
Voltage output, short-circuit current, max	24mA
Voltage output, short-circuit protection	Yes

Analog outputs
Number of analog outputs	2

Basic error limit (operational limit at 25 C)
Current, relative to output range, (+/-)	0.2%
Voltage, relative to output range, (+/-)	0.2%

between different circuits
between S- and MANA (UCM)	8 V DC

Cable length
shielded, max	800m; for current, 200 m for voltage

CiR - Configuration in RUN
Calibration possible in RUN	Yes
Reparameterization possible in RUN	Yes

Connection of actuators
for current output two-wire connection	Yes
for voltage output four-wire connection	Yes
for voltage output two-wire connection	Yes

Diagnoses
Wire-break	Yes; Only for output type "current"

Diagnoses
Overflow/underflow	Yes

Diagnoses
Monitoring the supply voltage	Yes

Diagnoses
Short-circuit	Yes; Only for output type "voltage"

Diagnostics indication LED
for channel diagnostics	Yes; red LED
Monitoring of the supply voltage (PWR-LED)	Yes; green LED
RUN LED	Yes; green LED

Diagnostics indication LED
ERROR LED	Yes; red LED

Diagnostics indication LED
Channel status display	Yes; green LED
for module diagnostics	Yes; red LED

Dimensions
Depth	129mm
Height	147mm
Width	25mm

Engineering with
PROFIBUS from GSD version/GSD revision	V1.0 / V5.1
PROFINET from GSD version/GSD revision	V2.3 / -
STEP 7 configurable/integrated from version	V5.5 SP3 / -

Engineering with
STEP 7 TIA Portal configurable/integrated from version	V13 / V13.0.2

Errors/accuracies
Temperature error (relative to output range), (+/-)	0.002%/K

Errors/accuracies
Crosstalk between the outputs, max	-100dB
Linearity error (relative to output range), (+/-)	0.15%

Errors/accuracies
Output ripple (relative to output range, bandwidth 0 to 50 kHz),	0.02%
Repeat accuracy in steady state at 25 C (relative to output rang	0.05%

General information
Firmware version	V1.0.0
HW functional status	FS01
Product type designation	AQ 2xU/I ST

General information
FW update possible	Yes

Highest safety class achievable for safety-related tripping of s
Category according to ISO 13849-1	Cat. 3
Performance level according to ISO 13849-1	PL d

Input current
Current consumption, max	110mA

Integration and conversion time/resolution per channel
Conversion time (per channel)	0.5ms
Resolution with overrange (bit including sign), max	16bit

Interrupts/diagnostics/status information
Diagnostics function	Yes

Interrupts/diagnostics/status information
Substitute values connectable	Yes

Isolation
Isolation tested with	707 V DC (type test)

Load impedance (in rated range of output)
with current outputs, max	750Ω
with voltage outputs, min	1kΩ; 0.5 kOhm at 1 to 5 V

Load impedance (in rated range of output)
with current outputs, inductive load, max	10mH
with voltage outputs, capacitive load, max	1

Operating mode
MSO	Yes
Oversampling	No

Operational error limit in overall temperature range
Current, relative to output range, (+/-)	0.3%
Voltage, relative to output range, (+/-)	0.3%

Other
Note:	Supplied incl. 40-pole push-in front connectors

Output ranges, current
-20 mA to +20 mA	Yes

Output ranges, current
4 mA to 20 mA	Yes

Output ranges, current
0 to 20 mA	Yes

Output ranges, voltage
-5 V to +5 V	No
0 to 10 V	Yes
1 V to 5 V	Yes

Output ranges, voltage
-10 V to +10 V	Yes

Potential separation channels
between the channels	No
between the channels and backplane bus	Yes
Between the channels and load voltage L+	Yes
between the channels, in groups of	2

Power
Power available from the backplane bus	0.65W

Power loss
Power loss, typ	2.7W

Product function
Isochronous mode	No

Product function
Output range scalable	No

Product function
Prioritized startup	No

Product function
I&M data	Yes; I&M0 to I&M3

Settling time
for capacitive load	2.5ms

Settling time
for inductive load	2.5ms
for resistive load	1.5ms

SIL acc. to IEC 62061
SILCL according to IEC 62061	SIL 2

Standards, approvals, certificates
Suitable for safety-related tripping of standard modules	Yes; From FS02

Supply voltage
Reverse polarity protection	Yes

Supply voltage
permissible range, lower limit (DC)	19.2V
permissible range, upper limit (DC)	28.8V
Rated value (DC)	24V

Weights
Weight, approx	200g