SIMATIC S7-400 FM 450-1 Скоростной счетчик 6ES7 450-1AP01-0AE0

24 V encoder supply
Output current, max	300mA
Short-circuit protection	Yes

24 V encoder supply
24 V	Yes; 1L+ (-3 V)

5 V encoder supply
Short-circuit protection	Yes

5 V encoder supply
5 V	Yes; 5.2 V
Output current, max	300mA

Alarms
Hardware interrupt	Yes; Parameterizable

Alarms
Diagnostic alarm	Yes; Parameterizable

Auxiliary voltage 1L+, load voltage 2L+
permissible range, lower limit (DC)	20.4V; Dynamic 18.5 V
permissible range, upper limit (DC)	28.8V; dynamic 30.2 V
Rated value (DC)	24V

Connectable encoders
Incremental encoder (asymmetrical)	Yes
Incremental encoder (symmetrical)	Yes; With 2 pulse trains offset by 90

Connectable encoders
24 V initiator	Yes

Connectable encoders
24 V directional element	Yes; 1 pulse train, 1 direction level

connection method / header
required front connector	1x 48-pin

Counter
Number of counter inputs	2; 32 bit or

Counter input 24 V
Input current for signal "1", typ	9mA
Input voltage for signal "0"	-30 to +5 V

Counter input 24 V
Counting frequency, max	200kHz
Input voltage for signal "1"	+11 to +30V

Counter input 5 V
Differential input voltage	min. 0.5 V
Type	RS 422

Counter input 5 V
Counting frequency, max	500kHz
Terminating resistor	220Ω

Diagnoses
Diagnostic information readable	Yes

Diagnostics indication LED
external fault EXTF (red)	Yes
internal fault INTF (red)	Yes

Diagnostics indication LED
Status indicator digital output (green)	Yes

Diagnostics indication LED
Status indicator digital input (green)	Yes

Digital inputs
Functions	1 for gate start, 1 for gate stop, 1 for setting the counter

Digital inputs
Number of digital inputs	6

Digital outputs
Number of digital outputs	4

Digital outputs
Limitation of inductive shutdown voltage to	2L+ (-39 V)

Digital outputs
Short-circuit protection	Yes; Clocked electronically

Dimensions
Depth	210mm
Height	290mm
Width	25mm

for standard inputs
at "0" to "1", max	2.5
parameterizable	Yes

Input current
from load voltage 2L+ (without load), max	60

Input current
from load voltage 1L+ (without load), max	50mA

Input current
from backplane bus 5 V DC, max	300mA

Input current
for signal "1", typ	9mA

Input delay (for rated value of input voltage)
Input frequency (with a time delay of 0.1 ms), max	200kHz

Input voltage
for signal "0"	-28.8 ... +5V
for signal "1"	+11 to +28.8V

Interrupts/diagnostics/status information
Diagnostics function	Yes

Interrupts/diagnostics/status information
Status indicator	Yes; 14 green LEDs for status of CR, DIR, inputs and outputs

Isolation
Isolation tested with	500 V

Output current
for signal "1" permissible range for 0 to 60 C, max	0.6A
for signal "1" permissible range for 0 to 60 C, min	5mA

Output current
for signal "1" rated value	0.5A; Res. / P.D. 5 W tungsten 24 V DC

Output delay with resistive load
"0" to "1", max	300

Output voltage
for signal "0", max	3V
for signal "1", min	2L+ (-1,5 V)

Potential separation counter
between the channels and backplane bus	Yes; Optocoupler

Potential separation digital inputs
between the channels and backplane bus	Yes; Optocoupler

Potential separation digital outputs
between the channels and backplane bus	Yes; Optocoupler

Power loss
Power loss, typ	6W

Weights
Weight, approx	650g