Предлагаем вам купить "SIMATIC S7-300 SM 322 Модуль вывода DO - 6ES7 322-8BH10-0AB0
по выгодной цене оптом или в розницу. Артикул данного товара - "6ES73228BH100AB0", бренд – "Siemens". Мы осуществляем доставку по Москве и всей России; гарантируем доставку товара в срок. После оформления заказа, наша команда свяжется с Вами для подтверждения заказа и уточнения деталей доставки. Если у Вас возникли вопросы или требуется помощь в выборе товара, Вы можете связаться с нашим отделом продаж.
SIMATIC S7-300 SM 322 Модуль вывода DO - 6ES7 322-8BH10-0AB0 , 16 OUT, 24 VDC
6ES73228BH100AB0
SIMATIC S7-300 SM 322 Модуль вывода DO - 6ES7 322-8BH10-0AB0 , 16 OUT, 24 VDC
SIEMENS SIMATIC S7-300, модуль вывода дискретных сигналов SM 322 ( 6ES7322-8BH10-0AB0 )
- оптическая изоляция, 16 выходов = 24В / 0,5А
диагностика обрыва (сигнал 0 и 1)
Комплектующие Siemens в г. Ростов-на-Дону в наличии и под заказ
Документация
- Обзор серии контроллеров Siemens Simatc S7-300 (рус, 1,9 мб)
Описание серии контроллеров Siemens Simatc S7-300 ч.1 (рус, 2,2 мб)
- Описание серии контроллеров Siemens Simatc S7-300 ч.2 (рус, 2,4 мб)
6ES73228BH100AB0
| Alarms | |
| Diagnostic alarm | Yes |
| Cable length | |
| shielded, max | 1000m |
| unshielded, max | 600m |
| connection method / header | |
| required front connector | 1x 40-pin |
| Diagnoses | |
| Wire-break | Yes |
| Diagnoses | |
| missing load voltage | Yes |
| Diagnoses | |
| Diagnostic information readable | Yes |
| Diagnoses | |
| Short-circuit | Yes |
| Diagnostics indication LED | |
| Channel fault indicator F (red) | Yes |
| Diagnostics indication LED | |
| Group error SF (red) | Yes |
| Rated load voltage PWR (green) | No |
| Diagnostics indication LED | |
| Status indicator digital output (green) | Yes |
| Digital outputs | |
| Number of digital outputs | 16 |
| Digital outputs | |
| Short-circuit protection | Yes |
| Digital outputs | |
| Response threshold, typ | 1.4A; per channel |
| Digital outputs | |
| Limitation of inductive shutdown voltage to | L+ (-68 V) |
| Dimensions | |
| Depth | 120mm |
| Height | 125mm |
| Width | 40mm |
| horizontal installation | |
| up to 60 C, max | 2A |
| Input current | |
| from backplane bus 5 V DC, max | 100mA |
| Input current | |
| from load voltage L+ (without load), max | 100mA |
| Interrupts/diagnostics/status information | |
| Alarms | Yes |
| Diagnostics function | Yes |
| Isolation | |
| Isolation tested with | 500 V DC |
| Load resistance range | |
| upper limit | 4kΩ |
| Load resistance range | |
| lower limit | 48Ω |
| Load voltage L+ | |
| permissible range, lower limit (DC) | 20.4V |
| permissible range, upper limit (DC) | 28.8V |
| Rated value (DC) | 24V |
| Output current | |
| for signal "1" permissible range, max | 0.6A |
| Output current | |
| for signal "1" rated value | 0.5A |
| Output current | |
| for signal "1" permissible range, min | 5mA |
| Output current | |
| for signal "0" residual current, max | 0.7mA |
| Output delay with resistive load | |
| "0" to "1", max | 3ms |
| "1" to "0", max | 3ms |
| Output voltage | |
| for signal "1", min | L+ (-0.7 V) |
| Parallel switching of two outputs | |
| for redundant control of a load | Yes |
| Parallel switching of two outputs | |
| for uprating | No |
| Potential separation digital outputs | |
| between the channels | No |
| between the channels, in groups of | 4 |
| Potential separation digital outputs | |
| between the channels and the power supply of the electronics | No |
| Potential separation digital outputs | |
| between the channels and backplane bus | Yes |
| Power loss | |
| Power loss, typ | 6W |
| Switching capacity of the outputs | |
| on lamp load, max | 5W |
| Switching frequency | |
| with resistive load, max | 100Hz |
| Switching frequency | |
| with inductive load (acc. to IEC 60947-5-1, DC13), max | 2Hz |
| Switching frequency | |
| on lamp load, max | 10Hz |
| vertical installation | |
| up to 40 C, max | 2A |
| Weights | |
| Weight, approx | 350g |