SIMATIC S7-300 SM 327 Модуль ввода-вывода DI-DO - 6ES7 327-1BH00-0AB0

Cable length
shielded, max	1000m
unshielded, max	600m

Connectable encoders
permissible quiescent current (2-wire sensor), max	1.5mA

Connectable encoders
2-wire sensor	Yes

connection method / header
required front connector	20-pin

Diagnostics indication LED
Status indicator digital input (green)	Yes

Diagnostics indication LED
Status indicator digital output (green)	Yes

Digital inputs
Number of digital inputs	8; 8 hard-wired, 8 others individually parameterizable

Digital inputs
Input characteristic curve in accordance with IEC 61131, type 1	Yes

Digital outputs
Number of digital outputs	8; can also be parameterized individually as DI

Digital outputs
Response threshold, typ	1A

Digital outputs
Limitation of inductive shutdown voltage to	L+ (-54 V)

Digital outputs
Controlling a digital input	Yes
Short-circuit protection	Yes

Dimensions
Depth	120mm
Height	125mm
Width	40mm

for standard inputs
at "0" to "1", max	4.8ms
at "0" to "1", min	1.2ms
at "1" to "0", max	4.8ms
at "1" to "0", min	1.2ms

horizontal installation
up to 40 C, max	4A
up to 60 C, max	3A

Input current
from load voltage L+ (without load), max	20mA

Input current
from backplane bus 5 V DC, max	60mA

Input current
for signal "1", typ	6mA

Input voltage
Rated value (DC)	24V

Input voltage
for signal "0"	-30 to +5 V
for signal "1"	+15 to +30 V
Type of input voltage	DC

Interrupts/diagnostics/status information
Alarms	No
Diagnostics function	No

Isolation
Isolation tested with	500 V DC

Load resistance range
lower limit	48Ω

Load resistance range
upper limit	4kΩ

Load voltage L+
permissible range, lower limit (DC)	20.4V
permissible range, upper limit (DC)	28.8V
Rated value (DC)	24V

Output current
for signal "1" minimum load current
for signal "1" rated value	0.5A

Output current
for signal "1" permissible range, min	5mA

Output current
for signal "1" permissible range, max	0.6A

Output current
for signal "0" residual current, max	0.5mA

Output delay with resistive load
"0" to "1", max	350
"1" to "0", max	500

Output voltage
for signal "1", min	L+ (-1.5 V)

Parallel switching of two outputs
for uprating	No

Parallel switching of two outputs
for redundant control of a load	Yes; only outputs of the same group

Potential separation digital inputs
between the channels and backplane bus	Yes; Optocoupler

Potential separation digital inputs
between the channels	No

Potential separation digital inputs
between the channels, in groups of

Potential separation digital outputs
between the channels and backplane bus	Yes; Optocoupler

Potential separation digital outputs
between the channels	No
between the channels, in groups of

Power loss
Power loss, typ	3W

Switching capacity of the outputs
on lamp load, max	5W

Switching frequency
with inductive load (acc. to IEC 60947-5-1, DC13), max	0.5Hz

Switching frequency
on lamp load, max	10Hz

Switching frequency
with inductive load, max	0.5Hz
with resistive load, max	100Hz

up to 40 C, max
up to 60 C, max	16

vertical installation
up to 40 C, max	2A

Weights
Weight, approx	200g