Simatic S7- 414-5H 6ES7 414-5HM06-0AB0

1. Interface
Interface type	MPI/PROFIBUS DP
Isolated	Yes

2. Interface
Isolated	Yes

2. Interface
Autonegotiation	Yes
Change of IP address at runtime, supported	No

2. Interface
Interface type	PROFINET
Number of connection resources	64

2. Interface
Autocrossing	Yes
automatic detection of transmission rate	Yes; Autosensing

3. Interface
Interface type	PROFIBUS DP

3. Interface
Number of connection resources	16

4. Interface
Plug-in interface modules	Synchronization modules 6ES7960-1AA06-0XA0 or 6ES7960-1AB06-0XA0

4. Interface
Interface type	Pluggable synchronization submodule (FO)

5. Interface
Plug-in interface modules	Synchronization modules 6ES7960-1AA06-0XA0 or 6ES7960-1AB06-0XA0

5. Interface
Interface type	Pluggable synchronization submodule (FO)

Address area
Inputs, max	6kbyte
Outputs, max	6kbyte
User data consistency, max	1024byte

Analog channels
Inputs	4096
Outputs	4096

Analog channels
of which central	4096

Backup
present	Yes
without battery	No

Backup
with battery	Yes; all data

Backup battery
Backup current, max	1000
Backup current, typ	180
Backup time, max	Dealt with in the module data manual with the secondary conditions and the factors of influence
Feeding of external backup voltage to CPU	5 V DC to 15 V DC

CiR - Configuration in RUN
CiR synchronization time, basic load	100ms
CiR synchronization time, time per I/O byte	0

Clock
Hardware clock (real-time)	Yes

Clock
retentive and synchronizable	Yes

Clock
Deviation per day (buffered), max	1.7s; Power off
Deviation per day (unbuffered), max	8.6s; Power on
Resolution	1ms

Clock synchronization
in AS, master	Yes
in AS, slave	Yes
on Ethernet via NTP	Yes; As client
to DP, master	Yes

Clock synchronization
supported	Yes

Clock synchronization
to MPI, master	Yes

Clock synchronization
to DP, slave	Yes
to MPI, slave	Yes

communication functions / header
Data record routing	Yes

communication functions / header
Number of connectable OPs with message processing	63; When using Alarm_S/SQ and Alarm_D/DQ
Number of connectable OPs without message processing	63
PG/OP communication	Yes

configuration / programming / header
Nesting levels	7
System function blocks (SFB)	see instruction list

configuration / programming / header
Access to consistent data in process image	Yes
Command set	see instruction list
System functions (SFC)	see instruction list

configuration / programming / number of simultaneously active SF
DPNRM_DG	8
DP_TOPOL	1
PARM_MOD	1
RDSYSST	8
RD_REC	8
WR_DPARM	2
WR_PARM	8
WR_REC	8

configuration / programming / number of simultaneously active SF
RDREC	8
WRREC	8

Configuration software
STEP 7	Yes

CPU processing times
for bit operations, typ	18.75ns
for floating point arithmetic, typ	37.5ns
for word operations, typ	18.75ns

CPU processing times
for fixed point arithmetic, typ	18.75ns

Data areas and their retentivity
Retentive data area (incl. timers, counters, flags), max	Total working and load memory (with backup battery)

DB
Size, max	64kbyte

DB
Number, max	6000; Number range: 1 to 16000

Diagnostic buffer
present	Yes

Diagnostic buffer
Number of entries, max	3200

Diagnostic buffer
adjustable	Yes
preset	120

Digital channels
Inputs	65536
Outputs	65536

Digital channels
of which central	65536

Dimensions
Depth	219mm
Height	290mm
Width	50mm

Emission of radio interference acc. to EN 55 011
Limit class B, for use in residential areas	No

Emission of radio interference acc. to EN 55 011
Limit class A, for use in industrial areas	Yes

Engineering with
Programming package	As of STEP 7 V5.5 SP2 with HF1

FB
Size, max	64kbyte

FB
Number, max	3000; Number range: 0 to 7999

FC
Size, max	64kbyte

FC
Number, max	3000; Number range: 0 to 7999

Flag
Size, max	8192byte

Flag
Number of clock memories	8; in 1 memory byte

Flag
Retentivity available	Yes

Flag
Retentivity preset	MB 0 to MB 15

Forcing
Forcing	Yes

Forcing
Forcing, variables	Inputs/outputs, bit memories, distributed I/Os
Number of variables, max	256

General information
Firmware version	V6.0
HW functional status	1
Product type designation	CPU 414-5H PN/DP

Global data communication
supported	No

Hardware configuration
connectable OPs	63
Multicomputing	No
Number of expansion units, max	21

I/O address area
Inputs	8kbyte
Outputs	8kbyte

IEC counter
Number	Unlimited (limited only by RAM capacity)

IEC counter
Type	SFB

IEC counter
present	Yes

IEC timer
Number	Unlimited (limited only by RAM capacity)

IEC timer
Type	SFB

IEC timer
present	Yes

Input current
from backplane bus 5 V DC, max	1.9A
from backplane bus 5 V DC, typ	1.6A

Input current
from backplane bus 24 V DC, max	150mA; 150 mA per DP interface
from interface 5 V DC, max	90mA; At each DP interface

Interface modules
Number of connectable IM 460s, max	6
Number of connectable IM 463s, max	4; Single mode only
Number of connectable IMs (total), max	6

Interface types
integrated switch	Yes
Number of ports	2
RJ 45 (Ethernet)	Yes

Interface types
RS 485	Yes

Interface types
Output current of the interface, max	150mA

Interfaces
Number of RS 485 interfaces	2

Interfaces
Number of other interfaces	2; Fiber-optic interface

Interfaces
Optical interface	No

Isochronous mode
Equidistance	No

Know-how protection
User program protection/password protection	Yes

Know-how protection
Block encryption	Yes; With S7 block Privacy

Load memory
expandable FEPROM	Yes; with Memory Card (FLASH)
expandable FEPROM, max	64Mbyte
expandable RAM	Yes
expandable RAM, max	64Mbyte
integrated RAM, max	512kbyte

Local data
adjustable, max	16kbyte
preset	8kbyte

lower limit
preset	No times retentive
upper limit	2047

Media redundancy
Number of stations in the ring, max	50
Switchover time on line break, typ	200ms

Memory
Type of memory	other

MPI
Number of connections	32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
Transmission rate, max	12Mbit/s

Nesting depth
per priority class	24

Nesting depth
additional within an error OB	1

Number of connections
overall	64

Number of DP masters
integrated	2

Number of DP masters
via CP	10; CP 443-5 Extended

Number of DP masters
Mixed mode IM + CP permitted	No

Number of IO Controllers
integrated	1

Number of operable FMs and CPs (recommended)
CP, PtP	See manual Automation System S7-400H fault-tolerant systems. Limited by number of slots and number of connections

Number of operable FMs and CPs (recommended)
FM	See manual Automation System S7-400H fault-tolerant systems. Limited by number of slots and number of connections
PROFIBUS and Ethernet CPs	14; Of which max. 10 CP as DP master

OB
Number, max	see instruction list

OB
Number of delay alarm OBs	4; OB 20-23
Number of free cycle OBs	1; OB 1
Number of process alarm OBs	4; OB 40-43
Number of startup OBs	2; OB 100, 102
Number of synchronous error OBs	2; OB 121, 122

OB
Number of asynchronous error OBs	9; OB 80-88
Number of cyclic interrupt OBs	4; OB 32-35
Number of DPV1 alarm OBs	3; OB 55-57
Number of time alarm OBs	4; OB 10-13
Size, max	64kbyte

Open IE communication
ISO-on-TCP (RFC1006)	Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs
TCP/IP	Yes; via integrated PROFINET interface and loadable FBs
UDP	Yes; via integrated PROFINET interface and loadable FBs

Open IE communication
Local port numbers used at the system end	0, 20, 21, 25, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535

Open IE communication
Keep-alive function, supported	Yes
Number of connections, max	62

Open IE communication
Data length, max	1472byte
several passive connections per port, supported	Yes

Operating hours counter
Number	16

Operating hours counter
Granularity	1h
Number/Number range	0 to 15

Operating hours counter
Range of values	SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours
retentive	Yes

Power loss
Power loss, typ	7.5W

Process image
Inputs, adjustable	8kbyte
Outputs, adjustable	8kbyte

Process image
Outputs, default	256byte

Process image
Access to consistent data in process image	Yes
consistent data, max	244byte
Inputs, default	256byte

Product function
Isochronous mode	No

PROFIBUS DP master
Number of DP slaves, max	96

PROFIBUS DP master
Number of connections, max	16

PROFIBUS DP master
Transmission rate, max	12Mbit/s

PROFIBUS DP slave
Number of connections	No configuration of CPU as DP slave

PROFINET IO Controller
Transmission rate, max	100Mbit/s

Programming language
CFC	Yes
FBD	Yes
GRAPH	Yes
HiGraph	Yes
LAD	Yes
SCL	Yes
STL	Yes

Protocols
Media redundancy	Yes
Open IE communication	Yes
PROFINET IO Controller	Yes
PROFINET IO Device	No
Web server	No

Protocols
MPI	Yes

Protocols
PROFIBUS DP slave	No

Protocols
PROFIBUS DP master	Yes

Protocols
Point-to-point connection	No
PROFINET CBA	No

Retentivity
adjustable	Yes

S5 compatible communication
Number of simultaneous AG-SEND/AG-RECV orders per CPU, max	64/64
supported	Yes; (via CP max. 10 and FC AG_SEND and FC AG_RECV)
User data per job (of which consistent), max	240byte
User data per job, max	8kbyte

S7 basic communication
supported	No

S7 communication
as client	Yes
as server	Yes
supported	Yes
User data per job, max	64kbyte

S7 communication
User data per job (of which consistent), max	462byte; 1 variable

S7 counter
Number	2048

S7 message functions
Program alarms	Yes

S7 message functions
Number of login stations for message functions, max	63; Max. 63 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 8 with Alarm, Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC)

S7 message functions
Process diagnostic messages	Yes

S7 message functions
Alarm 8-blocks	Yes
Number of instances for alarm 8 and S7 communication blocks, max	2500
preset, max	900
Process control messages	Yes
SCAN procedure	No
simultaneously active Alarm-S blocks, max	400; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks
Symbol-related messages	No

S7 message functions
Number of archives that can log on simultaneously (SFB 37 AR_SEN	16

S7 times
Number	2048

Service data
can be read out	Yes

Services
Activation/deactivation of DP slaves	No
Activation/deactivation of IO Devices	No
Device replacement without swap medium	Yes
Direct data exchange (slave-to-slave communication)	No
DPV0	Yes
DPV1	Yes
Equidistance	No
Global data communication	No
IO Devices changing during operation (partner ports), supported	No
Isochronous mode	No
Number of connectable IO Devices for RT, max	256
Number of connectable IO Devices, max	256; In redundant mode via both interfaces
of which in line, max	256
PG/OP communication	Yes
Prioritized startup	No
Routing	Yes
S7 basic communication	No
S7 communication	Yes
S7 communication, as client	Yes
S7 communication, as server	Yes
Send cycles	250
Shared device	Yes; Single mode only
SYNC/FREEZE	No
Updating time	250

SIMATIC communication
S7 routing	Yes

Slots
required slots	2

Standard communication (FMS)
supported	Yes; Via CP and loadable FB

Status/control
Status/control variable	Yes; Up to 16 variable tables
Variables	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters

Status/control
Number of variables, max	70

Subprocess images
Number of subprocess images, max	15

Supply voltage
Rated value (DC)	Power supply via system power supply

Test commissioning functions
Number of breakpoints	16
Status block	Yes

Test commissioning functions
Single step	Yes

Time difference in system when synchronizing via
MPI, max	200ms

Time difference in system when synchronizing via
Ethernet, max	10ms; Via NTP

Time range
lower limit	10ms
upper limit	9990s

usable for OP communication
reserved for OP communication	1

usable for PG communication
reserved for PG communication	1

User data per DP slave
Inputs, max	244byte
Outputs, max	244byte
per slot, max	128byte
Slots, max	244
User data per DP slave, max	244byte

Web server
supported	No

Weights
Weight, approx	995g

Work memory
expandable	No
integrated	4Mbyte

Work memory
integrated (for data)	2Mbyte

Work memory
integrated (for program)	2Mbyte